Connecting with the NX102 using the Fuuz Industrial Gateway
Capabilities of the NX102 Controller
The Omron NX102 has 2 available Ethernet ports.
One port can be set as the OPCUA communication port, you can then use the 2nd port as a Modbus TCP or EthernetIP port.
Specifics regarding the Omron NX102 Communications capabilities can be found here: https://www.ia.omron.com/products/family/3705/specification.html
The NJ and NX series controllers support the common protocols listed above, so you’re able to utilize the off the shelf Fuuz Gateway drivers including -
ModbusTCP
OPCUA
and
EthernetIP
in order to facilitate communications with the controllers.
Fuuz team article · last updated 2026-02-07