# Omron PLC/HMI NX102 Connectivity with Fuuz Gateway

**URL:** <https://community.fuuz.com/t/omron-plc-hmi-nx102-connectivity-with-fuuz-gateway/32>\
**Category:** Devices and Gateways\
**Created:** [October 20, 2026, 9:04pm UTC](https://community.fuuz.com/t/omron-plc-hmi-nx102-connectivity-with-fuuz-gateway/32 "2026-10-20T21:04:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Craig](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@Craig](https://community.fuuz.com/u/Craig)\
**Post date:** [October 20, 2026, 9:04pm UTC](https://community.fuuz.com/t/omron-plc-hmi-nx102-connectivity-with-fuuz-gateway/32/1 "2026-10-20T21:04:36Z")

</div>

## Connecting with the NX102 using the Fuuz Industrial Gateway

## Capabilities of the NX102 Controller

The Omron NX102 has 2 available Ethernet ports.  
One port can be set as the OPCUA communication port, you can then use the 2nd port as a Modbus TCP or EthernetIP port.

Specifics regarding the Omron NX102 Communications capabilities can be found here: [https://www.ia.omron.com/products/family/3705/specification.html](https://www.ia.omron.com/products/family/3705/specification.html)

The NJ and NX series controllers support the common protocols listed above, so you’re able to utilize the off the shelf Fuuz Gateway drivers including -  
ModbusTCP  
OPCUA  
and  
EthernetIP  
in order to facilitate communications with the controllers.

* * *

Fuuz team article · last updated 2026-02-07